Stepping Motor
Stepping Motor
Safety :
IEC TS 60034-20-1:2002 Rotating electrical machines - Part 20-1: Control motors - Stepping motors
EMC : -
Performance :-
Local Standard
USA :
29 CFR 1910.303 - General requirements. Design Safety Standards for Electrical Systems
NEC Article 430 Motors, Motor Circuits, and Controllers
69 FR 27989 - Federal Motor Vehicle Safety Standards; Side Impact Protection; Side Impact Phase-In Reporting Requirements
UL 1004-6 Standard for Safety Servo and Stepper Motors
88 FR 7629 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors
ANSI/NEMA MG 1-2016 Motors and Generators
10 CFR § 431.446 - Small electric motors energy conservation standards and their effective dates.
42 U.S. Code § 6317 - Energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors
Europe:
EN 61800-5-1:2007/A11:2021(AMENDMENT) Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
EN IEC 61800-3:2018(MAIN) Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
DD CLC/TS 60034-20-1:2004 Rotating electrical machines. Control motors Stepping motors
China:
GB/T 12350-2022 - Safety requirements for small power motors
GB 12668.3-2012 - Adjustable Speed Electrical Power Drive Systems - Part 3: EMC requirements and specific test methods
GB/T 40131-2021 - General specification for reduced-speed permanent-magnet Stepping Motors
GB/T 20638-2006 - General specification for Stepping Motors
Japan:
JIS C 4201:2015 Small rotating electrical machines - General requirements
JIS C 4421:2008 Adjustable speed electrical power drive systems (PDS) -- Electromagnetic compatibility (EMC) requirements and specific test methods
JIS C 4060:2019 Stepping motors
JIS C 4061:2019 Stepping motor drivers
Korea:
KS C IEC 60335-2-34:2021 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
KS C IEC 60034-30-1:2014 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
Taiwan:
CNS 62841 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery − Safety
CNS 13783-1 Electromagnetic compatibility − Requirements for household appliances, electric tools and similar apparatus
CNS 10920 V Belts and Pulleys for electric motors
Brasil:
ABNT NBR17074 DE 02/2023 Rotating electrical machines — Thermal protection (IEC 60034-11:2020 MOD)
ABNT NBR 15750-1:2012 Electromagnetic compatibility of technical equipment - Part 1: General
ABNT NBR15356 DE 01/2016 Variable speed V-belts - Requirements
ABNT NBRIEC60034-5 DE 10/2022 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Mexico:
NOM-003-SCFI-2014 Electrical products - Safety specifications
NOM-001-SCFI-2018 Electronic Devices - Safety Requirements and Test Methods
NOM-016-ENER-2016 Energy efficiency of AC motors, three-phase, induction, squirrel cage type, nominal power of 0.746 kW to 373 kW. Limits, testing method and marking
Argentina:
IRAM 2491-4-13 Electromagnetic compatibility (EMC). Part 4-13 - Testing and measurement techniques. Low frequency immunity tests on the AC power supply port against harmonics, interharmonics and signaling frequencies transmitted by the electrical network
IRAM 2093 Small power electric motors. Test methods.
IRAM 2126 Small power electric motors. Dimensions.
Australia:
AS/NZS 60204.1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
AS 61800.3-2005 Adjustable speed electrical power drive systems, Part 3: EMC requirements and specific test methods
AS/NZS IEC 60947.8:2015 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
South Africa:
SANS 60034-11:2022 (Ed. 3.00) Rotating electrical machines - Part 11: Thermal protection
SANS 61800-3:2013 (Ed. 2.01) Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods
SANS 60034-1:2021 (Ed. 5.00) Rotating electrical machines Part 1: Rating and performance
Saudi Arabia:
GSO IEC 60034-11:2008 Rotating Electrical Machines – Part 11: Thermal Protection
GSO IEC 61800-3:2014 Adjustable Speed Electrical Power Drive Systems - Part 3: EMC Requirements And Specific Test Methods
GSO IEC 60034-9:2014 Rotating Electrical Machines - Part 9: Noise Limits
GSO IEC 60034-1:2008 Rotating Electrical Machines - Part 1: Rating And Performance
EAEU:
GOST IEC 60034-11-2014 Rotating electrical machines - Part 11: Thermal protection
GOST IEC 61800-3-2016 Adjustable speed electrical power drive systems. Part 3. EMC requirements and specific test methods
GOST IEC/TS 60034-30-2-2021 Rotating electrical machines. Part 30-2. Efficiency classes of variable speed AC motors (IE-code)
GOST IEC 60034-2-1-2017 Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
