Home 등기구

LED 드라이버 | LED driver

LED driver


LED driver
LED driver

Safety : IEC 61347-1:2007/AMD2:2012 Lamp controlgear - Part 1: General and safety requirements
IEC 61347-2-13:2014/AMD1:2016 Amendment 1 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

EMC: CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
IEC 61547:2023 Equipment for general lighting purposes. EMC immunity requirements
Performance : IEC 61000-3-2 single-phase input current ≦ 16A equipment harmonic current emission limit
IEC 61000-3-3 limits of voltage fluctuations and flicker in low-voltage power supply systems
IEC 61547 Electromagnetic compatibility immunity requirements for general lighting equipment
IEC 55015 Limits and measurement methods of electromagnetic interference characteristics of electrical lighting or type equipment


현지 표준


미국
IES G-2-10: Guideline for the Application of General Illumination (“White”) Light-Emitting Diode (LED) Technologies
IES TM-16-17: Solid State Lighting Sources and Systems
IES LM-79-19: Approved Method: Optical and Electrical Measurements of Solid-State Lighting Products
UL 1598C, 1st Edition: Standard for Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits
FCC PART 15.109 Unintentional radiator.
ANSI C82.77-4 2020 Edition, 2020 Lighting Equipment— Power Line Frequency Magnetic Field Immunity Test
ANSI C82.77-10-2014 Lighting Equipment - Harmonic Emission Limits - Related Power Quality Requirements
CEC energy efficiency standards Title 20
UL 2388 Standard for Flexible Lighting Products (Ed. 2)
UL 8750 Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products (Ed. 2)
ANSI C78.377-2017: Specifications for the Chromaticity of Solid State Lighting Products
NEMA SSL-1-2016: Electronic Drivers for LED Devices, Arrays, or Systems

유럽

EN IEC 55015:2019(MAIN) Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment IEC 61547:2020 Equipment for general lighting purposes - EMC immunity requirements
EN IEC 61000-3-2:2019(MAIN) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
EN IEC 61000-3-2:2019/A1:2021 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
EN 61000-3-3:2013(MAIN) Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
EN 61347-1:2015(MAIN) Lamp controlgear - Part 1: General and safety requirements
EN 61347-1:2015/A1:2021 - Lamp controlgear - Part 1: General and safety requirement
EN 61347-2-13:2014(MAIN) Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
EN 61347-2-13:2014/A1:2017 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
EN IEC 62384:2020(MAIN) DC or AC supplied electronic controlgear for LED modules - Performance requirements
EN 62384:2006(MAIN) DC or AC supplied electronic control gear for LED modules - Performance requirements

중국

GB 19510.1-2004 Safety of lamps control gear Part 1: General and safety requirements GB/T 24827.13-2019 Safety of LED modules for general lighting - Part 2-13: Particular requirements for DC or AC supplied LED modules
GB/T 18595-2014 Equipment for general lighting purposes-EMC immunity requirements
GB/T 24825-2018: LED driver - Part 1: General requirements
GB/T 34764-2017: LED driver for general lighting - Performance requirements

일본

JIS C 8147-2-13:2017 Lamp controlgear-Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
JIS C 61000-3-2:2019 Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <= 20 A per phase)

한국

KS C 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
KS C 9815:2019 (Mod CISPR 15:2018) Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
KS C 9547:2020 (Mod IEC 61547:2009) Electromagnetic compatibility (EMC) - Immunity requirements for lighting equipment."

대만
CNS 14115 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

브라질

Nbriec62560 of 10/2021 LED light bulb has integrated control device for general lighting service for voltage> 50 V - Safety specifications
ABNT NBRIEC/CISPR15 DE 12/2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
NBRIEC62717 of 09/2022 - LED module for general lighting - Performance requirements
ABNT NBRIEC61347-2-12 DE 08/2013 Lamp controlgear - Part 2-12: Particular requirements for d.c or a.c supplied electronic controlgear for discharge lamps (excluding fluorescent lamps)

멕시코

NMX-I-J-324-NYCE-ANCE-2022 Lighting – Integrated light-emitting diode (LED) lamps for general lighting – Safety requirements and test methods
NMX-J-550/3-2-ANCE-2005: ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (DEVICES WITH INPUT CURRENT <=16 A PER PHASE).
NMX-J-550/3-3-ANCE-2005:ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (DEVICES WITH INPUT CURRENT <=16 A PER PHASE).

아르헨티나

IRAM-IEC CISPR 15 Limits and methods of measurement of the characteristics related to radioelectric disturbance of lighting equipment and the like.

오스트레일리아

AS/NZS 61347.1:2016 - Lamp control gear - General and safety requirements
SNZ AS/NZS CISPR 15 2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

남아프리카
공화국

SANS 61000-3-2:2009 (Ed. 3.02) Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
SANS 61000-3-3:2009 (Ed. 2.00) Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
SANS 61547:2021 (Ed. 3.00) Equipment for general lighting purposes - EMC immunity requirements
SANS 62384:2008 (Ed. 1.00) DC or AC supplied electronic control gear for LED modules - Performance requirements
SANS 61347-2-13:2015 (Ed. 2.00) Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

사우디아라비아
:
GSO IEC TS 62861:2021 Guidelines For Reliability Testing Of The Main Components Of LED Light Sources And Luminaires
GSO IEC 61547:2013 Equipment For General Lighting Purposes - Electromagnetic Compatibility (EMC) Impedance Immunity Requirements
GSO IEC/PAS 62717:2013 LED Luminaires For General Lighting - Performance Requirements

유라시아
경제 연합

GOST IEC 61347-2-13-2013 Lamp control gear. Part 2-13. Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules
GOST IEC 62442-2-2017 Energy efficiency of ballasts for lamps. Part 2. Ballasts for high-intensity discharge lamps (except fluorescent lamps). Measurement method for determining the effectiveness of a ballast
GOST IEC 62442-3-2017 Energy efficiency of ballasts for lamps. Part 3. Ballasts for halogen lamps and modules with light emitting diodes. Measurement method for determining the effectiveness of a ballast